800-222-4597  info@crownwire.com

Item # 1/4WCI, 6x36 Winch Cable IWRC

Item # 1/4WCI, 6x36 Winch Cable IWRC

Available Options:
Length:
Notes:

Number of Strands6
Wires per Strand36
Lay of RopeRight Regular Lay
Core DesignIWRC
Wire Rope GradeXIPS
Diameter1/4 in
Weight per Foot0.12 lbs
FeaturesBright Finish
Regular Lay RopeThe most standard, and accepted for a wide range of applications. The direction of the individual wires is opposite to the direction of the strands. Because of this, the rope is less likely to untwist, and therefore is easier to handle than lang lay rope. This rope is also less subject to crushing.
Breaking Strength (BRT)3.4 t

The individual wires that form strands are most commonly available in high-carbon steel, generally supplied in an uncoated, or "bright" finish. Zinc coated, or "Galvanized" rope is available in some sizes and carries a nominal strength of 10% below that of a bright rope. On special request, wire rope can be drawn-galvanized, offering the same nominal strength as a bright rope.

Regular Lay Rope

The most standard, and accepted for a wide range of applications. The direction of the individual wires is opposite to the direction of the strands. Because of this, the rope is less likely to untwist, and therefore is easier to handle than lang lay rope. This rope is also less subject to crushing. a1047.jpg

Wires are laid geometrically to form strands, each composed of two or more wires. Breaking these strand configurations into several classifications is the basis for identifying wire rope.

A steel center rope yields a higher strength along with the ability to resist crushing Steel cores are required when the environment exceeds 180°(F)
There are currently no product reviews
Write a review!


Special Box
Special Box
Special Box

NEWSLETTER SIGN UP

We will only send good NEWS

Secure Site