Item # 1/2SL, 6x7 Sand Line Steel Wire Rope With Fiber Core

Category: 6x7 Sand Line Steel Wire Rope (SL)

Item # 1/2SL, 6x7 Sand Line Steel Wire Rope With Fiber Core

A dependable bailing and swabbing line used by the oil, gas, and water well driller industry.


Number of Strands 6
Wires per Strand 7
Lay of Rope Right Regular Lay
Core Design High-Density Polypropylene Core
Wire Rope Grade IPS
Features Bright Finish
Diameter 1/2 in
Nominal Strength 10.3 t
Weight per Foot 0.38 lbs
Regular Lay Rope The most standard, and accepted for a wide range of applications. The direction of the individual wires is opposite to the direction of the strands. Because of this, the rope is less likely to untwist, and therefore is easier to handle than lang lay rope. This rope is also less subject to crushing.
The individual wires that form strands are most commonly available in high-carbon steel, generally supplied in an uncoated, or "bright" finish. Zinc coated, or "Galvanized" rope is available in some sizes and carries a nominal strength of 10% below that of a bright rope. On special request, wire rope can be drawn-galvanized, offering the same nominal strength as a bright rope.
Wires are laid geometrically to form strands, each composed of two or more wires. Breaking these strand configurations into several classifications is the basis for identifying wire rope.
The core is the supporting member of the rope, made of synthetic fibers. A fiber core rope offers flexibility. Note: The most popular fiber core is manufactured in polypropylene.
Have Questions Ask a Question

No Question yet

Special Box
Special Box
Special Box


We will only send good NEWS